Two full-size SUVs, three mid-size cars, or four small cars on a rack frame. Anything else is a negotiation with physics.
The number that matters is not how many you can physically force in. It is how many you can load, lash, unload and clear without damage, and what each of those units costs you in freight. On a Nansha to West Africa sailing at 1,000 to 1,500 US dollars per container, the gap between two cars and three cars is 167 to 250 dollars per unit. That is usually worth more than the discount a supplier offers you for buying the fourth car.
What a 40ft high cube actually gives you
| Measurement | 40ft high cube (40HQ) | Why it matters |
|---|---|---|
| Internal length | 12.03 m | Two 4.9 m SUVs plus lashing gap, no third |
| Internal width | 2.35 m | A 1.95 m wide car leaves 200 mm each side to work in |
| Internal height | 2.69 m | The limit that kills almost every rack plan |
| Door opening (w x h) | 2.34 x 2.58 m | The real gate. Wide-body kits and roof racks fail here |
| Payload | about 26,500 kg | Rarely the constraint. See the weight check below |
| Floor area | 28.3 m2 | Four small cars need 15 m2 of it, not 28 |
Read the height line again. Two sedans at 1.45 m each need 2.90 m of vertical space once you add the deck of a rack. The box gives you 2.69 m. That single number is why the internet's claim of "four cars per 40ft" only holds for small vehicles, and why a supplier who promises four full-size SUVs in one container has either never loaded one or is planning to damage yours.
The length bands, and what each one carries
| Body length | Typical models | Flat loaded | With rack frame |
|---|---|---|---|
| Under 4.0 m | Battery city cars, small hatchbacks | 3 | 4 |
| 4.0 to 4.6 m | Compact sedans and small crossovers | 3 | 3, or 4 if height is under 1.55 m |
| 4.6 to 4.8 m | Mid-size sedans, compact SUVs | 3 | 3 |
| 4.8 to 5.0 m | Full-size SUVs, pickups, 7-seat MPVs | 2 | 2 |
| Over 5.0 m | Long-wheelbase vans, minibuses | 2, or 1 plus cargo | 2 |
The band that surprises buyers is 4.6 to 4.8 m. A 4.75 m crossover looks like it should take three in a 12.03 m box, and it does, but only if you accept 100 to 150 mm between bumpers and no room for the lashing crew to work. We measure the actual units before quoting a container count, because a 20 mm factory body kit on a 4.78 m car can turn three into two.
Why weight is almost never the limit
Weight check on a three-car load
Three mid-size cars at about 1,650 kg each: 4,950 kg
Three large electric SUVs at about 2,300 kg each: 6,900 kg
Available payload in a 40HQ: about 26,500 kg
Conclusion: even a full container of electric SUVs uses a quarter of the payload. The box runs out of length and door width long before it runs out of weight.
Weight still matters in one place: the rack. A rack frame has its own rating, and putting a 2.3 tonne electric SUV on the upper deck is a different conversation from putting a 1.2 tonne hatchback there. If a loader tells you the weight is fine, ask for the rack rating instead. That is the number that decides whether your car arrives with a straight roof.
The rack frame: what it buys and what it costs
A steel rack, called a frame in the trade, gives you a second deck. It is not free and it is not always worth it. Typical cost is 200 to 400 US dollars per container, and it eats 300 to 400 mm of your vertical space for the deck itself.
When we recommend a rack: a load of four small cars under 4.0 m, or a mixed load where one low hatchback can ride above two sedans. When we refuse one: any car over 1.55 m tall going on top, any load where the top car's roof would sit within 100 mm of the container ceiling, and any rack without a load certificate. A car that touches the ceiling for 30 days of ocean movement does not arrive as the car you inspected.
What we will not do: we do not build a wooden deck to squeeze in one more unit. Timber decks are not rated, they crush under a 2 tonne car in heavy weather, and a collapsed deck damages every car in the box, not just the one on top. We have lost orders because we quoted two cars instead of the three the buyer wanted. We still quote two.
Cost per car: where the loading decision shows up
Nansha to West Africa, 40HQ at 1,000 to 1,500 USD
Two cars per box: 500 to 750 USD freight per car
Three cars per box: 333 to 500 USD freight per car
Four cars per box: 250 to 375 USD freight per car
East Africa adds about 250 USD per container, so the per-car penalty for loading loosely is slightly higher there.
Run the same maths against roll-on roll-off and the picture changes. RoRo is roughly 200 USD cheaper per unit on the same route, but Nansha has no RoRo berth. The nearest RoRo loading port is Shanghai, which adds 400 to 600 USD per car to truck the vehicle there, plus a week of transit inside China. That is why our shipments leave from Nansha in containers: 40 minutes from our yard in Liaobu, and a forwarder we work with daily rather than a port we visit twice a year.
Mixed loads: the loading order decides the outcome
The sequence on a three-car load is fixed by unload order at destination, not by what fits first. Put the car for the furthest delivery deepest, keep the doors of the first car to be unloaded clear, and leave the last 800 mm of the container for lashing access. Get this wrong and the buyer's clearing agent spends two hours extracting a car that should have driven out.
Two rules we apply on every booking. First, no car is loaded with its parking brake as the only restraint; we use four-point soft lashing to the floor rings and chock both axles. Second, every battery-electric or hybrid unit travels with the key present, the 12 volt battery connected and the state of charge set where the shipping line requires, because a car that arrives with a flat 12 volt battery cannot be driven off the terminal and the storage clock starts running against you.
The full export process around a container load takes four days on our side, including customs declaration. Most of that time is document work, not loading. If you want the container count and the freight per unit for a specific mix of models, send the list with body lengths and we will return a loading plan rather than a guess.
Frequently Asked Questions
How many cars fit in a 40ft container?
Two full-size SUVs and pickups, three mid-size cars, or four small cars under 4.0 metres if a certified rack frame is used. The limit is body length and the 2.34 by 2.58 metre door opening, not weight: a 40ft high cube has about 26,500 kg of payload and even three electric SUVs use only a quarter of it.
Can I really fit four cars in one 40ft container?
Only when all four are short and low. The internal height is 2.69 metres, so a rack deck plus two cars has to fit inside that. Four small hatchbacks under 4.0 metres long and 1.55 metres tall work. Four full-size SUVs do not, and a seller promising that is planning to damage your vehicles or has never loaded a container.
Is a 20ft container ever better value?
For a single car, sometimes, because it is easier to book and cheaper in absolute terms. Per unit it is always worse: a 20ft holds one car with almost no room left, so you pay a whole container for a single vehicle. If you are buying two or more, a 40ft high cube wins on cost per car.
Is container shipping cheaper than RoRo from China?
Per unit, RoRo is roughly 200 US dollars cheaper on the same route. The catch is port access. Nansha, the port 40 minutes from our yard, has no RoRo berth, so RoRo means trucking to Shanghai at 400 to 600 dollars per car plus a week of domestic transit. For most of our buyers, the container from Nansha is cheaper door to door.
Do you use rack frames for loading?
Yes, when the maths works: a steel rack costs 200 to 400 dollars per container and gives a second deck. We only use racks with a load certificate, we never put a car taller than 1.55 metres on the upper deck, and we refuse a rack when the top car would sit within 100 mm of the ceiling. We also do not build unrated timber decks to squeeze in one more unit.
What documents and conditions apply to electric cars in a container?
An electric or hybrid vehicle needs a UN38.3 battery test report, an MSDS and a dangerous goods declaration under the current IMDG code, plus the state of charge condition the specific shipping line requires. The permitted charge level differs by carrier, so confirm it with the booking desk before the container is packed rather than at the gate.
Published by Leo Car Export (Zhongqi Auto Overseas), a used and new vehicle direct supplier at Liaobu, Dongguan. Our yard sits 40 minutes from Nansha Port, we load containers there every week, and freight quotes come from a forwarder we work with daily rather than from a rate website. Stock is BYD, Changan, Jetour, Toyota and GAC, with a deep inventory of hybrids and new-energy models, sourced at factory-level wholesale through our founder's 25 years in the trade.
Send your model list and get a loading plan →Sources for the technical figures: ISO 668 and standard 40ft high cube container specifications (internal dimensions 12.03 x 2.35 x 2.69 m, payload about 26,500 kg), International Maritime Dangerous Goods Code provisions for vehicles powered by lithium batteries (UN 3556, UN 3557, UN 3558 and UN 3166 for hybrids), and Leo Car Export's own loading records and freight quotations from Nansha Port. Vehicle lengths are manufacturer figures for the models we stock. Written by William Gu, Export Operations Manager, Leo Car Export.